Search
Search Criteria
Products meeting the search criteria
ESP32-C3 superMINI (ESP32-C3-SuperMini)
ESP32-C3-MINI single core RISC-V MCU from Espressif
Note: this board uses the internal USB CDC interface connected to the USB-C connector for uploading.
the Arduino IDE needs to be set to reflect this. To put the MCU into upload mode you need to
press and hold the "BOOT" button, then press and release the "EN" button, finally releasing the "RESET"
after each power on.
- 4 Meg Flash
- 400 kbytes SRAM
- 15 GPIOs
- WIFI
- BlueTooth 5
Note: this board uses the internal USB CDC interface connected to the USB-C connector for uploading.
the Arduino IDE needs to be set to reflect this. To put the MCU into upload mode you need to
press and hold the "BOOT" button, then press and release the "EN" button, finally releasing the "RESET"
after each power on.
ESP32-C3 RISC-V Super Mini dev Kit with USB-C
ESP32-C3 dev Kit (ESP32-C3-mini)
ESP32-C3-FH4 single core RISC-V MCU from Espressif
Note: this board uses the internal USB CDC interface connected to the USB-C connector for uploading.
the Arduino IDE needs to be set to reflect this. To put the MCU into upload mode you need to
press and hold the "BOOT" button, then press and release the "EN" button, finally releasing the "RESET"
after each power on.
- 4 Meg Flash
- 400 kbytes SRAM
- 15 GPIOs
- WIFI
- BlueTooth 5
Note: this board uses the internal USB CDC interface connected to the USB-C connector for uploading.
the Arduino IDE needs to be set to reflect this. To put the MCU into upload mode you need to
press and hold the "BOOT" button, then press and release the "EN" button, finally releasing the "RESET"
after each power on.
ESP32-C3 RISC-V dev Kit with USB-C
Out of Stock
CAD$7.49
- 1