ATTiny
ATtiny MCUs and modules
ATtiny13A (ATtiny13A)
ATtiny13A-PU
DIP-08
1kByte Flash Memory
64 bytes SRAM
Pin and Code compatible with ATtiny85
DIP-08
1kByte Flash Memory
64 bytes SRAM
Pin and Code compatible with ATtiny85
ATtiny13A-PU
ATtiny85 Pro (ATtiny85pro)
ATtiny85 Dev Kit with SPI ICSP connector.
Female header for connecting a CP2102 USB to Serial adapter.
see related products tab for additional components.
Can be used on a BreadBoard.
ATtiny85 Dev Kit with SPI ICSP connector.
Female header for connecting a CP2102 USB to Serial adapter.
see related products tab for additional components.
Can be used on a BreadBoard.
ATtiny85 Dev Kit with ICSP
ATtiny85 Nano (ATtiny85nano)
Now in Stock
ATtiny85 Dev Kit with SPI ICSP connector,
Reset Button and 5 LEDs
Designed for use with a CP2102 USB to Serial board if you want Serial.
Designed to be programmed with a USBasp.
May be used with ATtiny85 or ATtiny13A
suitable for BreadBoarding - pins included but not soldered.
The BareBones option is PCB Only - missing:
DIP-08 Socket.
male header pins for ICSP and Breadboard pins.
6 pin female Header for CP2102.
see the related products tab for options to the BareBones model.
ATtiny85 Dev Kit with SPI ICSP connector,
Reset Button and 5 LEDs
Designed for use with a CP2102 USB to Serial board if you want Serial.
Designed to be programmed with a USBasp.
May be used with ATtiny85 or ATtiny13A
suitable for BreadBoarding - pins included but not soldered.
The BareBones option is PCB Only - missing:
DIP-08 Socket.
male header pins for ICSP and Breadboard pins.
6 pin female Header for CP2102.
see the related products tab for options to the BareBones model.
ATtiny85 Dev Kit with ICSP and 5 LEDs
ATtiny10 Solo (ATtiny10solo)
Now in Stock!!!
ATtiny10 Break Out Board
suitable for BreadBoarding
Bare Bones has no ATtiny10
BreadBoard pins included but must be soldered.
ATtiny10 Break Out Board
suitable for BreadBoarding
Bare Bones has no ATtiny10
BreadBoard pins included but must be soldered.
ATtiny10 Break Out Board
ATtiny10 LED (ATtiny10led)
Now in Stock!!!
ATtiny10 Break Out Board with
LED on B1
suitable for BreadBoarding
NOTE: - Bare Bones version does not include ATtiny10
ATtiny10 Break Out Board with
LED on B1
suitable for BreadBoarding
NOTE: - Bare Bones version does not include ATtiny10
ATtiny10 Dev Kit with LED
ATtiny10 Rst (ATtiny10rst)
Now in Stock!!!
ATtiny10 Break Out Board with Reset Switch
and LED on B0
suitable for BreadBoarding.
NOTE: - the Bare Bones version does not include ATtiny10
ATtiny10 Break Out Board with Reset Switch
and LED on B0
suitable for BreadBoarding.
NOTE: - the Bare Bones version does not include ATtiny10
ATtiny10 Dev Kit with Reset and LED
ATtiny10 SPI (ATtiny10spi)
Now in Stock!!!
ATtiny10 Break Out Board with SPI (TPI)
ICSP connector and 4 LEDs.
suitable for BreadBoarding.
NOTE: - we now have the USBasp with updated firmware in stock
which includes the TPi protocol - program an ATtiny10 as easily
as a "Nano" -- see "Related Products" tab to the right.
NOTE: - Bare Bones version does not include ATtiny10 installed.
ATtiny10 Break Out Board with SPI (TPI)
ICSP connector and 4 LEDs.
suitable for BreadBoarding.
NOTE: - we now have the USBasp with updated firmware in stock
which includes the TPi protocol - program an ATtiny10 as easily
as a "Nano" -- see "Related Products" tab to the right.
NOTE: - Bare Bones version does not include ATtiny10 installed.
ATtiny10 Dev Kit with ICSP and 4 LEDs
ATtiny10 Debug Display (Debug10)
1 line x 8 digit LED Display for debug output of ATtiny10
Red LEDs
SPI interface (MAX7219)
may be daisy chained
We have written a "driver" to use this display with an ATtiny10 for debug display. see Tiny10 Debug Display.
Red LEDs
SPI interface (MAX7219)
may be daisy chained
We have written a "driver" to use this display with an ATtiny10 for debug display. see Tiny10 Debug Display.
1 line x 8 digit LED with ATtiny10 driver
USBasp adapter for ATtiny85/13A (TinyUSBasp)
USBasp Adapter for BreadBoarding ATtiny85/13A
Just place over the ATtiny chip and connect the USBasp cable to this adapter.
Ships with long pins to provide clearance.
my own design.
Just place over the ATtiny chip and connect the USBasp cable to this adapter.
Ships with long pins to provide clearance.
my own design.
USBasp Adapter for BreadBoarding ATtiny
Nano88 (Nano88)
Now in Stock
ATtiny88 'Nano' clone - MH-ET LIVE Tiny88(16.0Mhz).
The ATtiny88 is one of the more powerful members of the ATtiny family.
It offers more I/O and performance BUT less Flash and SRAM.
Quick comparison to a regular 'Nano':
GPIO pins: Nano88 = 26 --- 'Nano' = 14 pins.
Flash: Nano88 = 8kB --- 'Nano' = 32kB
SRAM: Nano88 = 0.5kB --- 'Nano' = 2kB
EEPROM: Nano88 = 64 B --- 'Nano' = 1kB
This board comes with the microNucleus direct USB bootloader installed.
microNucleus will require a driver for Windows and you will need to add a uDev file to Linux - we can help you with Linux. You will have to hit the reset button to initiate uploads.
We can also install OptiBoot, but you will need to use an external USB to UART board like our CP2102 or FTDI etc.
We recommend using an USBasp to avoid wasting the 500-800 bytes of flash taken up by the bootloader and the need to hit reset to upload.
We highly recommend Spence Konde's ATtinyCore boards package which will allow you te select many options from the Arduino IDE Tools menu.
ATtiny88 'Nano' clone - MH-ET LIVE Tiny88(16.0Mhz).
The ATtiny88 is one of the more powerful members of the ATtiny family.
It offers more I/O and performance BUT less Flash and SRAM.
Quick comparison to a regular 'Nano':
GPIO pins: Nano88 = 26 --- 'Nano' = 14 pins.
Flash: Nano88 = 8kB --- 'Nano' = 32kB
SRAM: Nano88 = 0.5kB --- 'Nano' = 2kB
EEPROM: Nano88 = 64 B --- 'Nano' = 1kB
This board comes with the microNucleus direct USB bootloader installed.
microNucleus will require a driver for Windows and you will need to add a uDev file to Linux - we can help you with Linux. You will have to hit the reset button to initiate uploads.
We can also install OptiBoot, but you will need to use an external USB to UART board like our CP2102 or FTDI etc.
We recommend using an USBasp to avoid wasting the 500-800 bytes of flash taken up by the bootloader and the need to hit reset to upload.
We highly recommend Spence Konde's ATtinyCore boards package which will allow you te select many options from the Arduino IDE Tools menu.
http://drazzy.com/package_drazzy.com_index.json
ATtiny88 based Nano clone
Out of Stock
CAD$6.49
- 1