Displays

8x8 5050 NeoPixel Matrix

65 x 70mm
3 wire I/F Cascadable

Please Note that the images are for reference only.
Drill hole locations are not as pictured.
Last Image is an actual photo.

1 line x 8 digit LED Display for debug output of ATtiny10
Red LEDs
SPI interface (MAX7219)
may be daisy chained

We have written a "driver" to use this display with an ATtiny10 for debug display.  see Tiny10 Debug Display.

4 line x 20 char LCD Display I2C interface

2 line x 16 char LCD Display optional I2C interface if you want the I2C BackPack solder on add the "soldered pins" option to your order.

2 line x 16 char LCD Display Acrylic Shell

4 line x 20 char LCD Display Acrylic Shell

1 line x 4 char LED Display Red LEDs I2C interface may be daisy chained

connects directly to LCD 16 pin interface

1 digit 8x8 3mm LED matrix
Red LEDs
SPI interface
MAX7219 controller
may be daisy chained

right angle pins are not suitable for end-stacking

1 line x 8 digit LED Display for debug output of ATtiny10
Red LEDs
SPI interface (MAX7219)
may be daisy chained

We have written a "driver" to use this display with an ATtiny10 for debug display.  see Tiny10 Debug Display.

• 3.95" TFT Display for Arduino or Pi
  
  
• ST7796 Controller
• 480 x 320 resolution
• on-board video memory.
• 8/16 bit parallel interface - HX8357B
• 5V tolerant
• touch screen I/F - I2C
• mega2560 Shield

The best source for Arduino software for these graphics shields is the MCUFRIEND_kbv library which is basically a front end to the AdaFruit_GFX library with custom hooks for Arduino shields.  This library can easily be installed directly from the Arduino IDE just by searching for MCUFRIEND in the library manager.  It has some excellent examples which will become availabl from the "Examples" menu once the library is installed.  I recommend the graphictest_kbv or the testcard_kbv examples.